002DB52
- Indian Oil Corporation Ltd (IOCL)
- Propel
- High Density Polyethylene ( HDPE )
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpHDPE 002DB52 is a natural high density bimodal Polyethylene grade produced by Lyondell Basell’s Hostalen Slurry Process with Excellent Processability & Mechanical Properties. This grade exhibits a good balance of stiffness and impact properties.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
Indian Oil Corporation Ltd (IOCL) - Brand
Propel
- Plastic Generic Family
Polyethylene (PE) - Plastic Generic Symbol
High Density Polyethylene ( HDPE )
Properties
Attributes
Material Status
Commercial: ActiveAvailability
IndiaFeatures
High density bimodal grade | Bimodal high density polyethylene resin | Produced by Lyondell Basell’s Hostalen Slurry process | Excellent processability | Excellent Mechanical Properties | Good balance of stiffness & Impact propertiesApplications
Large volume blow moulded containers | Large Volume Containers for transport & storage of Chemicals | Large containers | Large Containers (up to 100L) for transport & storage of ChemicalsPhysical Form
GranulesProcessing Grades
Blow molding container grade | Large bulk container grade | Container Grade | Bulk container gradeProcessing Technology
Blow MoldingIndustry
Water Tank IndustryCertifications
IS : 10141-1982 | FDA: CFR Title 21,177.1520Price Search Attributes
Search Application
HDPE Blow LargePhysical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Melt Flow Index | 0.2 | gm/10 min | ASTM D1238 | (190°C & 5 Kg) ASTM | - |
Melt Flow Index | 5.5 | gm/10 min | ASTM D1238 | (190°C & 21.6 Kg) | - |
Density | 0.953 | gm/cm³ | ASTM D1505 | 23°C | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile strength at Yield | 28 | MPa | ASTM D638 | Type-IV | - |
Elongation @ Yield | 10 | % | ASTM D638 | Type-IV | - |
Elongation @ Break | >600 | % | ASTM D638 | Type-IV | - |
Notched Izod Impact Strength @ 23° C | 500 | J/m | ASTM D256 | 23°C | - |
Flexural Modulus | 1100 | MPa | ASTM D790 | - | - |
Rockwell hardness | 63 | Shore D | ASTM D2240 | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
VICAT Softening Point | 126 | °C | ASTM D1525 | 10N | - |
Heat Deflection temperature | 75 | °C | ASTM D648 | 0.455MPa | - |
Notes
Recommended Processing Temperature: 180 – 220 oC Packaging Information: This material is packed and available in raffia bags with net content of 25.0 Kg only. The raffia bags used conforms to the minimum strength requirements of BIS, however, customer shall take due care while handling the bag. Prolonged exposure of these bags to sunlight may deteriorate the bag’s performance and cause spillage and wastage. IOCL does not warranty loss of material due to poor material handling practices. Storage & Handling: Prevent HDPE Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the storage temperature should not exceed 50˚C. Non - compliance to these precautionary measures can lead to degradation of the product causing color changes, odor and inadequate product performance. It is advised to process HDPE material within 06 months of delivery. Regulatory Information: HDPE 002DB52 meet “Specification for Polyethylene for safe use in contact with Foodstuff, Pharmaceuticals and Drinking water” as per IS: 10146-1982. It also confirms to the positive list of constituents as per IS: 10141-1982. The grade and Additives incorporated shall meet with FDA: CFR Title21, 177.1520, Olefin Polymers.
Disclaimer
The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Added to Instamine: 06-Apr-2022 10:42:17
Last Update: 30-Sep-2023 17:24:05
HDPE 002DB52 is a natural high density bimodal Polyethylene grade produced by Lyondell Basell’s Hostalen Slurry Process with Excellent Processability & Mechanical Properties. This grade exhibits a good balance of stiffness and impact properties.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Plastic Generic Symbol (Sub Group) | HDPE Prime / Virgin Resin |
Description | HDPE 002DB52 is a natural high density bimodal Polyethylene grade produced by Lyondell Basell’s Hostalen Slurry Process with Excellent Processability & Mechanical Properties. This grade exhibits a good balance of stiffness and impact properties. |
Material Status | Commercial: Active |
Availability | India |
Features | Bimodal high density polyethylene resin, Excellent Mechanical Properties , Excellent processability, Good balance of stiffness & Impact properties, High density bimodal grade, Produced by Lyondell Basell’s Hostalen Slurry process |
Applications | Large containers , Large Containers (up to 100L) for transport & storage of Chemicals , Large volume blow moulded containers , Large Volume Containers for transport & storage of Chemicals |
Physical Form | Granules |
Processing Grades | Blow molding container grade, Bulk container grade, Container Grade, Large bulk container grade |
Processing Technology | Blow Molding |
Industry | Water Tank Industry |
Certifications | FDA: CFR Title 21,177.1520, IS : 10141-1982 |
- Product Review
- Seller Review