2010PA WIRE AND CABLE
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpEnable™ 2010PA performance polymer resin is an ethylene 1-hexene copolymer. It is an excellent blend partner in halogen-free flame retardant compounds, LV silane cross-linkable insulation and cable jacketing to enhance mechanical properties such as tensile strength, elongation, tear and crack resistance. It combines good processability and provides melt strength for improved dimensional stability. Sufficient Cu-inhibitor should be added to meet specific aging requirements in insulation. For jacketing applications, addition of carbon black or UV stabilizer is required.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.920 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Index | 1.0 | gm/10 min | ASTM D1238 | (190°C / 2.16 Kg) | - |
Durometer Hardness | 50 | Shore D | ASTM D2240 | 15 sec | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile strength at Yield | 13 | MPa | ASTM D638 | (20 in/min(510mm/min)) | - |
Tensile strength at Break | 29 | MPa | ASTM D638 | (20 in/min(510mm/min)) | - |
Elongation @ Yield | 10 | % | ASTM D638 | (20 in/min(510mm/min)) | - |
Elongation @ Break | 670 | % | ASTM D638 | (20 in/min(510mm/min)) | - |
Flexural Modulus | 240 | MPa | ASTM D790A | (1% Secant, 0.0051 in/min(1.3mm/min)) | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Peak Melting Temperature | 114 | °C | EXXONMOBIL Method | - | - |
VICAT Softening Point | 108 | °C | EXXONMOBIL Method | - | - |
Electrical properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Volume Resistivity | 2.2E+15 | Ωm | IEC 62631-3-1 | (500 V) | - |
Relative Permittivity | 2.29 | IEC 62631-2-1 | (1 MHz) | - | |
Dissipation factor | 2.4E-4 | IEC 62631-2-1 | (1 MHz) | - |
Legal Statement:
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.
Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be
Present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.
Processing Statement:
Specimens were compression molded in accordance with ASTM D 4703, Procedure C
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Legal Statement: Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications. Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be Present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.
Processing Statement: Specimens were compression molded in accordance with ASTM D 4703, Procedure C Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability. |
- Product Review
- Seller Review