2703MC
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpEnable™ 2703MC resin is an ethylene 1-hexene copolymer. Enable™ performance polymer resins offer an outstanding balance between processing and film
properties, including tensile, impact and puncture. Easier processing and excellent properties lead to significant high pressure LDPE replacement in many
applications, yet with superior drawdown and enhanced toughness. TnPP is not intentionally added to Enable™ 2703MC resin.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Film Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile Strength at Yield TD | 15 | MPa | ASTM D882 | - | - |
Puncture Energy | 2.8 | J | EXXONMOBIL Method | - | - |
Puncture Force | 50 | N | EXXONMOBIL Method | - | - |
Elmendorf Tear Strength TD | 670 | gm | ASTM D1922 | - | - |
Elmendorf Tear Strength MD | 40 | gm | ASTM D1922 | - | - |
Secant Modulus TD - 1% Secant | 380 | MPa | ASTM D882 | - | - |
Secant Modulus MD - 1% Secant | 310 | MPa | ASTM D882 | - | - |
Elongation at Break TD | 750 | % | ASTM D882 | - | - |
Elongation at Break MD | 480 | % | ASTM D882 | - | - |
Tensile Strength at Break TD | 50 | MPa | ASTM D882 | - | - |
Tensile Strength at Break MD | 60 | MPa | ASTM D882 | - | - |
Tensile Strength at Yield MD | 13 | MPa | ASTM D882 | - | - |
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.927 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Index | 0.30 | gm/10 min | ASTM D1238 | (190°C / 2.16 Kg) | - |
Optical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Gloss @ 45° | 42 | ASTM D2457 | - | - | |
Haze | 12 | % | ASTM D1003 | - | - |
Impact Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Dart Drop Impact | 140 | gm | ASTM D 1709/A | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Peak Melting Temperature | 119 | °C | EXXONMOBIL Method | - | - |
VICAT Softening Point | 115 | °C | EXXONMOBIL Method | - | - |
Legal Statement:
Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process.
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement:
Film (1 mil / 25.4 micron) made on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of 380- 400°F (193 - 204°C), a 30 mil (0.76
mm) die gap at a rate of 10 lbs/hr/in die circumference (1.79 kg/hr/cm).
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Legal Statement: Tris(nonylphenol)phosphite (TNPP) CAS# 26523-78-4 is not intentionally used by ExxonMobil in this product. Although this product is not routinely tested for its presence, based on product composition knowledge this substance is not expected to be present. However, the fact that this substance is not intentionally used by ExxonMobil in this product does not exclude that trace levels of this substance may be present as a result of the specific characteristics of the raw materials and/or of the manufacturing process. Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement: Film (1 mil / 25.4 micron) made on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of 380- 400°F (193 - 204°C), a 30 mil (0.76 mm) die gap at a rate of 10 lbs/hr/in die circumference (1.79 kg/hr/cm).
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability. |
- Product Review
- Seller Review