B5004
- ONGC Petro Additions Ltd (OPAL)
- OPALENE HDPE
- High Density Polyethylene ( HDPE )
Request Sample
Request Documents
Ask Question
Share
You`ll need an account to perform this action. Don't worry. It's free!
Sign Up
You`ll need an account to compare products. Don't worry. It's free!
Sign Up
HDPE B5004 is a natural colored grade produced with the latest Mitsui CX slurry polymerization Technology.
You`ll need an account to add a review. Don't worry. It's free!
Sign Up
You`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Technical data sheetProduct Details
- Manufacturer
ONGC Petro Additions Ltd (OPAL) - Brand
OPALENE HDPE - Manufacturing Plant
Dahej OPAL
- Plastic Generic Family
Polyethylene (PE) - Plastic Generic Symbol
High Density Polyethylene ( HDPE )
Properties
Attributes
Material Status
Commercial: ActiveAvailability
IndiaFeatures
Good Processing Properties | Excellent ESCR Properties | Good external appearanceApplications
Large Containers (up to 100L) for transport & storage of Chemicals | Detergent | Lube Oil | Bottles & containers up to 10 L | Packaging of Pesticides & Surfactants | Bottles for Shampoo and CosmeticsPhysical Form
GranulesProcessing Grades
Bottle Grade | Small jar grade | Cosmetic bottles grade | Pesticide packaging grade | Surfactants packaging gradeProcessing Technology
Blow MoldingIndustry
Industrial Packaging Industry | Personal care & cosmetic packaging industryCertifications
FDA: CFR Title 21,177.1520 | IS: 10146-1982 | IS : 10141-1982Price Search Attributes
Search Application
HDPE Blow GeneralPhysical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Melt Flow Index | 0.40 | gm/10 min | ASTM D1238 | (190°C / 2.16 Kg) | - |
| Density | 0.950 | gm/cm³ | ASTM D1505 | (23°C) | - |
| Hardness | 65 | Shore D | ASTM D2240 | - | - |
Mechanical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Tensile strength at Yield | 24 | MPa | ASTM D638 | (50 mm/min) | - |
| Elongation @ Break | >500 | % | ASTM D638 | (50 mm/min) | - |
| Notched Izod Impact Strength @ 23° C | 140 | J/m | ASTM D256A | (23°C) | - |
| Charpy Impact Strength | 8.5 | KJ/m² | ISO 179-1 | - | - |
| Flexural Modulus | 900 | MPa | ASTM D790A | - | - |
| Environmental Stress - Cracking Resistance (ESCR) : @10% Igepal Soln (F₅₀) | >500 | Hours | ASTM D1693B | - | - |
| Tensile Strength | >15 | MPa | ASTM D638 | @ Break | - |
Thermal properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| VICAT Softening Point | 121 | °C | ASTM D1525 | (10 N) | - |
| Heat Deflection temperature | 78 | °C | ASTM D648 | (0.455MPa) | - |
Notes
Regulatory Requirements: HDPE Blow Molding grade B5004 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers. Storage & Handling: Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 o C. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance. Health and Safety Information: The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use
Disclaimer
The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Added to Instamine: 10-Apr-2021 13:21:30
Last Update: 24-May-2023 17:06:37
Regulatory Requirements:
HDPE Blow Molding grade B5004 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact
with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as
prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling:
Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free
and the Storage temperature should not exceed 50°C. Non - compliance to these precautionary measures can lead to degradation of the product
causing Color changes, Odor & inadequate product performance.
Health and Safety Information:
The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material
Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in.
Before using any material, a customer is advised to consult the MSDS for the product under consideration for use.
| Plastic Generic Family | Polyethylene (PE) |
|---|---|
| Plastic Generic Symbol (Sub Group) | HDPE Prime / Virgin Resin |
| Description | Regulatory Requirements: HDPE Blow Molding grade B5004 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling: Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50°C. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance.
Health and Safety Information: The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use. |
| Material Status | Commercial: Active |
| Availability | India |
| Features | Excellent ESCR Properties, Good external appearance, Good Processing Properties |
| Applications | Bottles & containers up to 10 L , Bottles for Shampoo and Cosmetics , Detergent, Large Containers (up to 100L) for transport & storage of Chemicals , Lube Oil , Packaging of Pesticides & Surfactants |
| Physical Form | Granules |
| Processing Grades | Pesticide packaging grade , Bottle Grade, Cosmetic bottles grade, Small jar grade, Surfactants packaging grade |
| Processing Technology | Blow Molding |
| Industry | Industrial Packaging Industry, Personal care & cosmetic packaging industry |
| Certifications | FDA: CFR Title 21,177.1520, IS : 10141-1982, IS: 10146-1982 |
- Product Review
- Seller Review