ExxonMobil™ HDPE HMA 035
- ExxonMobil Chemical
Request Sample
Request Documents
Ask Question
Share
You`ll need an account to perform this action. Don't worry. It's free!
Sign Up
You`ll need an account to compare products. Don't worry. It's free!
Sign Up
HMA 035 is a UV stabilized HDPE grade, characterized by excellent dimensional stability, very high stiffness and good impact strength.
You`ll need an account to add a review. Don't worry. It's free!
Sign Up
You`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Technical data sheetProduct Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Density | 0.964 | gm/cm³ | ASTM D1505 | - | - |
| Melt Index | 8.0 | gm/10 min | ASTM D1238 | (190°C/2.16 kg) | - |
Mechanical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Tensile strength at Yield | 27 | MPa | ISO 527-2/1A/50 | - | - |
| Flexural Modulus | 1200 | MPa | ISO 527-2/1A/50 | - | - |
| Environmental Stress - Cracking Resistance (ESCR) | 4 | Hours | ASTM D1693 | 122°F (50°C) | - |
| Izod Impact Strength, Notched | 6 | KJ/m² | ISO 180/1A | - | - |
| Tensile Stress | 27 | MPa | ISO 527-2/1A/50 | (@ Yield) | - |
| Tensile Strain | 9 | % | ISO 527-2/1A/50 | (@ Yield) | - |
| Tensile Strain | >100 | % | ISO 527-2/1A/50 | (@ Break) | - |
Thermal properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Heat Deflection temperature | 66 | °C | ISO 75-2 /B | (0.45 MPa) | - |
| Peak Melting Temperature | 135 | °C | ASTM D 3418 | - | - |
ADDITIONAL INFORMATION:
The molded properties were measured on 4 mm (157.5 mil) thick injection molded specimen based on ISO 294-1.
Heat Deflection temperature sample preparation, injection based on ISO1872. Tested flatwise position with specimen size of 80mm x 10mm x 4mm.
ESCR was measured on 2mm (78.7 mil) thick compression molded plate (F50, 10% lgepal, 50°C, 122°F)
LEGAL INFORMATION:
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
NOTES:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
| Plastic Generic Family | Polyethylene (PE) |
|---|---|
| Description | ADDITIONAL INFORMATION: The molded properties were measured on 4 mm (157.5 mil) thick injection molded specimen based on ISO 294-1. Heat Deflection temperature sample preparation, injection based on ISO1872. Tested flatwise position with specimen size of 80mm x 10mm x 4mm. ESCR was measured on 2mm (78.7 mil) thick compression molded plate (F50, 10% lgepal, 50°C, 122°F)
LEGAL INFORMATION: Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.
NOTES: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability. |
- Product Review
- Seller Review