ExxonMobil™ HDPE HMA 706
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpExxonMobil™ HDPE HMA 706 is a HDPE grade, characterized by fast cycling and good impact strength. It has high gloss and high dimensional stability.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.952 | gm/cm³ | ASTM D1505 | - | - |
Melt Index | 6.7 | gm/10 min | ASTM D1238 | (190°C/2.16 kg) | - |
Hardness | 56 | Shore D | ISO 868 | 15 sec, 73°F (23°C) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile strength at Yield | 23 | MPa | ISO 527-2/1A/50 | - | - |
Flexural Modulus | 730 | MPa | ISO 178 | 1% Secant | - |
Flexural Modulus | 600 | MPa | ISO 178 | 2% Secant | - |
Environmental Stress - Cracking Resistance (ESCR) : @10% Igepal Soln (F₅₀) | 6 | Hours | ASTM D1693 | 122°F (50°C) | - |
Izod Impact Strength, Notched | 0.046 | KJ/m² | ISO 180/1A | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Heat Deflection temperature | 63 | °C | ISO 75-2 /B | (0.45 MPa) | - |
Heat Deflection temperature | 43 | °C | ISO 75-2 /A | (1.80 MPa) | - |
Peak Melting Temperature | 129 | °C | EXXONMOBIL Method | - | - |
ADDITIONAL INFORMATION:
The molded properties were measured on 4 mm (157.5 mil) thick injection molded specimen based on ISO 294-1.
Heat Deflection temperature sample preparation, injection based on ISO1872. Tested flatwise position with specimen size of 80mm x 10mm x 4mm.
ESCR was measured on 2mm (78.7 mil) thick compression molded plate (F50, 10% lgepal, 50°C, 122°F)
LEGAL STATEMENT:
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
NOTES:
Typical properties: these are not to be construed as specifications.
1.Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | ADDITIONAL INFORMATION:
The molded properties were measured on 4 mm (157.5 mil) thick injection molded specimen based on ISO 294-1.
Heat Deflection temperature sample preparation, injection based on ISO1872. Tested flatwise position with specimen size of 80mm x 10mm x 4mm. ESCR was measured on 2mm (78.7 mil) thick compression molded plate (F50, 10% lgepal, 50°C, 122°F)
LEGAL STATEMENT: Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.
NOTES: Typical properties: these are not to be construed as specifications. 1.Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
|
- Product Review
- Seller Review