ExxonMobil™ HDPE HPA 020 Wire & Cable
- ExxonMobil Chemical
Request Sample
Request Documents
Ask Question
Share
You`ll need an account to perform this action. Don't worry. It's free!
Sign Up
You`ll need an account to compare products. Don't worry. It's free!
Sign Up
HPA 020 is a HDPE grade for Medium/High Voltage power cable jacketing. The grade should be used in blends with LLDPE to improve Environmental Stress Crack Resistance (ESCR). Sufficient Carbon Black or UV stabilizer should be added to meet cable jacketing specifications
You`ll need an account to add a review. Don't worry. It's free!
Sign Up
You`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Technical data sheetProduct Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Density | 0.952 | gm/cm³ | ASTM D1505 | - | - |
| High Load Melt Index | 9.0 | gm/10 min | ASTM D1238 | (190°C/21.6 kg) | - |
| Melt Mass Flow Rate | 0.35 | gm/10 min | ASTM D1238 | (190°C/5.0 kg) | - |
| Durometer Hardness | 62 | ASTM D2240 | (Shore D, 15 sec) | - |
Mechanical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Tensile strength at Yield | 27 | MPa | ASTM D638 | - | - |
| Tensile strength at Break | 33 | MPa | ASTM D638 | - | - |
| Elongation @ Yield | 9 | % | ASTM D638 | - | - |
| Elongation @ Break | 840 | % | ASTM D638 | - | - |
| Flexural Modulus | 960 | MPa | ASTM D790 | 1% Secant | - |
Thermal properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| VICAT Softening Point | 129 | °C | ASTM D1525 | - | - |
Electrical properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Volume Resistivity | 7.8E+16 | Ω·cm | ASTM D257 | - | - |
| Dielectric constant | 2.1 | ASTM D257 | (60 Hz) | - | |
| Dissipation Factor | < 1E-4 | ASTM D257 | (60 Hz) | - |
LEGAL STATEMENT:
This product is not intended for use in food contact application.
This product is not intended for use in medical applications and should not be used in any such applications.
PROCESSING STATEMENT:
Specimens were compression molded in accordance with ASTM D4703. The value listed as Density, ASTM D1505, was tested in accordance with EMC test methods.
NOTES:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability
| Plastic Generic Family | Polyethylene (PE) |
|---|---|
| Description | LEGAL STATEMENT: This product is not intended for use in food contact application. This product is not intended for use in medical applications and should not be used in any such applications.
PROCESSING STATEMENT: Specimens were compression molded in accordance with ASTM D4703. The value listed as Density, ASTM D1505, was tested in accordance with EMC test methods.
NOTES: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability |
- Product Review
- Seller Review