ExxonMobil™ HDPE HTA 001HP5
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpHTA 001HP5 is a high molecular weight HDPE film grade providing very good processability on high output extruders. Films made from HTA 001HP5 exhibit
excellent impact and toughness properties as well as high stiffness.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Film Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile Strength at Yield MD | 41 | MPa | ASTM D882 | - | - |
Tensile Strength at Yield TD | 29 | MPa | ASTM D882 | - | - |
Tensile Strength at Break MD | 60 | MPa | ASTM D882 | - | - |
Tensile Strength at Break TD | 48 | MPa | ASTM D882 | - | - |
Elongation at Break MD | 210 | % | ASTM D882 | - | - |
Elongation at Break TD | 430 | % | ASTM D882 | - | - |
Secant Modulus MD - 1% Secant | 1200 | MPa | ASTM D882 | - | - |
Secant Modulus TD - 1% Secant | 1200 | MPa | ASTM D882 | - | - |
Elmendorf Tear Strength MD | 7 | gm | ASTM D1922 | - | - |
Elmendorf Tear Strength TD | 30 | gm | ASTM D1922 | - | - |
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.952 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Rate | 0.32 | gm/10 min | ASTM D1238 | (190°C / 5.0 Kg) | - |
High Load Melt Index | 9.5 | gm/10 min | ASTM D1238 | (190°C / 2.1 Kg) | - |
Impact Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Dart Drop Impact | 190 | gm | ASTM D 1709/A | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
VICAT Softening Point | 126 | °C | ASTM D1525 | - | - |
Legal Statement:
This product is not intended for use in medical applications and should not be used in any such applications.
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
Processing Statement:
The film properties have been measured on 15 µm (0.59 mil) thick films with a blow-up ratio of 4 : 1 and a frostline height of 9 x die diameter (die diameter/ gap:
120mm/1.5mm (4.7 in/0.06 in); 215°C (419°F) melt temperature; 70 kg/hr (154 lb/hr) output).
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Legal Statement: This product is not intended for use in medical applications and should not be used in any such applications.
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
Processing Statement: The film properties have been measured on 15 µm (0.59 mil) thick films with a blow-up ratio of 4 : 1 and a frostline height of 9 x die diameter (die diameter/ gap: 120mm/1.5mm (4.7 in/0.06 in); 215°C (419°F) melt temperature; 70 kg/hr (154 lb/hr) output).
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
|
- Product Review
- Seller Review