ExxonMobil™ HDPE HTA 002
- ExxonMobil Chemical
Request Sample
Request Documents
Ask Question
Share
You`ll need an account to perform this action. Don't worry. It's free!
Sign Up
You`ll need an account to compare products. Don't worry. It's free!
Sign Up
HTA 002 is a general purpose medium molecular weight HDPE grade, characterized by easy processability, especially in coextrusion and blending with other
polyolefins. HTA 002 can also be used pure, especially for easy processing and conversion into small and thin bags, to be used for light item packaging.
You`ll need an account to add a review. Don't worry. It's free!
Sign Up
You`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Technical data sheetProduct Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Film Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Tensile Strength at Yield MD | 29 | MPa | ASTM D882 | - | - |
| Tensile Strength at Yield TD | 29 | MPa | ASTM D882 | - | - |
| Tensile Strength at Break MD | 60 | MPa | ASTM D882 | - | - |
| Tensile Strength at Break TD | 50 | MPa | ASTM D882 | - | - |
| Elongation at Break MD | 320 | % | ASTM D882 | - | - |
| Elongation at Break TD | 450 | % | ASTM D882 | - | - |
| Secant Modulus MD - 1% Secant | 960 | MPa | ASTM D882 | - | - |
| Secant Modulus TD - 1% Secant | 1200 | MPa | ASTM D882 | - | - |
| Elmendorf Tear Strength MD | 8 | gm | ASTM D1922 | - | - |
| Elmendorf Tear Strength TD | 60 | gm | ASTM D1922 | - | - |
Physical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Density | 0.952 | gm/cm³ | ASTM D1505 | - | - |
| Melt Flow Rate | 0.68 | gm/10 min | ASTM D1238 | (190°C / 5.0 Kg) | - |
| High Load Melt Index | 16 | gm/10 min | ASTM D1238 | (190°C / 2.1 Kg) | - |
Impact Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Dart Drop Impact | 160 | gm | ASTM D 1709/A | - | - |
Thermal properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| VICAT Softening Point | 126 | °C | ASTM D1525 | - | - |
Legal Statement:
This product is not intended for use in medical applications and should not be used in any such applications.
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
Processing Statement:
The film properties have been measured on 15 µm (0.59 mil) thick films with a blow-up ratio of 4 : 1 and a frostline height of 9 x die diameter (die diameter/ gap:
120mm/1.5mm (4.7 in/0.06 in); 215°C (419°F) melt temperature; 70 kg/hr (154 lb/hr) output).
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
| Plastic Generic Family | Polyethylene (PE) |
|---|---|
| Description | Legal Statement: This product is not intended for use in medical applications and should not be used in any such applications.
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
Processing Statement: The film properties have been measured on 15 µm (0.59 mil) thick films with a blow-up ratio of 4 : 1 and a frostline height of 9 x die diameter (die diameter/ gap: 120mm/1.5mm (4.7 in/0.06 in); 215°C (419°F) melt temperature; 70 kg/hr (154 lb/hr) output).
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
|
- Product Review
- Seller Review