ExxonMobil™ LDPE LD 100 Series Blown
- ExxonMobil Chemical
Request Sample
Request Documents
Ask Question
Share
You`ll need an account to perform this action. Don't worry. It's free!
Sign Up
You`ll need an account to compare products. Don't worry. It's free!
Sign Up
LD 100 series are LDPE grades, offering a good balance of optical and mechanical properties. Several additive packages are available according to the required
surface properties.
You`ll need an account to add a review. Don't worry. It's free!
Sign Up
You`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Technical data sheetProduct Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Film Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Tensile Strength at Yield MD | 11 | MPa | ASTM D882 | - | - |
| Tensile Strength at Yield TD | 11 | MPa | ASTM D882 | - | - |
| Tensile Strength at Break MD | 25 | MPa | ASTM D882 | - | - |
| Tensile Strength at Break TD | 22 | MPa | ASTM D882 | - | - |
| Elongation at Break MD | 330 | % | ASTM D882 | - | - |
| Elongation at Break TD | 550 | % | ASTM D882 | - | - |
| Secant Modulus MD - 1% Secant | 210 | MPa | ASTM D882 | - | - |
| Secant Modulus TD - 1% Secant | 230 | MPa | ASTM D882 | - | - |
| Elmendorf Tear Strength MD | 150 | gm | ASTM D1922 | - | - |
| Elmendorf Tear Strength TD | 120 | gm | ASTM D1922 | - | - |
Physical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Density | 0.923 | gm/cm³ | ASTM D1505 | - | - |
| Melt Flow Index | 2.0 | gm/10 min | ASTM D1238 | (190°C / 2.16 Kg) | - |
Optical Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Gloss @ 45° | 63 | ASTM D257 | - | - | |
| Haze | 6.1 | % | ASTM D1003 | - | - |
Impact Properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Dart Drop Impact | 80 | gm | ASTM D 1709/A | - | - |
Thermal properties
| Title | Value | Unit | Method | Additional Information | Property Notes |
|---|---|---|---|---|---|
| Peak Melting Temperature | 110 | °C | EXXONMOBIL Method | - | - |
Legal Statement:
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement:
Film (2.0 mil/50.8 micron) made from LD 051.LQ resin on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of 360-380°F (182-193°C), a 30 mil (0.76 mm) die gap at a rate of 8 lbs/hr/in die circumference (1.43 kg/hr/cm).
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
| Plastic Generic Family | Polyethylene (PE) |
|---|---|
| Description | Legal Statement: Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement: Film (2.0 mil/50.8 micron) made from LD 051.LQ resin on a 2.5 inch (63.5 mm) blown film line with a 2.5:1 blow-up ratio, a melt temperature of 360-380°F (182-193°C), a 30 mil (0.76 mm) die gap at a rate of 8 lbs/hr/in die circumference (1.43 kg/hr/cm).
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
|
- Product Review
- Seller Review