ExxonMobil™ LLDPE LL 6301 Series Molding
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign Up
LL 6301 series are medium density LLDPE grades, with a relatively high molecular weight, resulting in molded articles which are very tough and exhibit
excellent environmental stress cracking resistance. When compared to LDPE grades of equivalent density, LL 6301 grades exhibits a higher heat deflection
temperature and a significantly greater resistance to long term creep.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.936 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Index | 5.0 | gm/10 min | EXXONMOBIL Method | (190°C / 2.16 Kg) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile Stress | 15 | MPa | ISO 527-2/1A/50 | - | - |
Tensile Strain | 10 | % | ISO 527-2/1A/50 | - | - |
Tensile Strain | >100 | % | ISO 527-2/1A/50 | - | - |
Flexural Modulus | 470 | MPa | ISO 178 | - | - |
Environmental Stress - Cracking Resistance (ESCR) : @10% Igepal Soln (F₅₀) | 40 | Hours | ASTM D1693 | (50°C,10% legpal) | - |
Izod Impact Strength, Notched | 32 | KJ/m² | ISO 180/1A | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Peak Melting Temperature | 125 | °C | EXXONMOBIL Method | - | - |
VICAT Softening Point | 114 | °C | ISO 306 | - | - |
Legal Statement:
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement:
Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D 4703 Procedure C (177C,15C/min): ESCR 2 mm plaques, notch condition B.
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Legal Statement: Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement: Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D 4703 Procedure C (177C,15C/min): ESCR 2 mm plaques, notch condition B.
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
|
- Product Review
- Seller Review