ExxonMobil™ LLDPE LL 6301 Series Wire & Cable
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpExxonMobil™ LL 6301 Series are ethylene 1-butene Ziegler Natta linear low density polyethylene resins recommended for various compounding
applications.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.936 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Index | 5.0 | gm/10 min | ASTM D1238 | (190°C / 2.16 Kg) | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Peak Melting Temperature | 125 | °C | EXXONMOBIL Method | - | - |
Electrical properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Volume Resistivity | 3.8E+14 | Ωm | IEC 62631-3-1 | (500 V) | - |
Relative Permittivity | 2.30 | IEC 62631-2-1 | (50 Hz) | - | |
Dissipation factor | 2.7E-4 | IEC 62631-2-1 | (50 Hz) | - |
Legal Statement:
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement:
Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D 4703 Procedure C (177C,15C/min): ESCR 2 mm plaques, notch condition B.
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Legal Statement: Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement: Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D 4703 Procedure C (177C,15C/min): ESCR 2 mm plaques, notch condition B.
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
|
- Product Review
- Seller Review