M5618
- ONGC Petro Additions Ltd (OPAL)
- OPALENE HDPE
- High Density Polyethylene ( HDPE )
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpHDPE M5618 is a natural colored grade produced with the latest Mitsui CX slurry polymerization Technolog
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ONGC Petro Additions Ltd (OPAL) - Brand
OPALENE HDPE - Manufacturing Plant
Dahej OPAL
- Plastic Generic Family
Polyethylene (PE) - Plastic Generic Symbol
High Density Polyethylene ( HDPE )
Properties
Attributes
Availability
IndiaFeatures
High flow | Good Processability | Good rigidityApplications
Housewares | Buckets | Caps & closures | Thin wall food containersPhysical Form
GranulesProcessing Grades
Housewares grade | Caps & Closure Grade | Thin wall injection molding gradeProcessing Technology
Injection MoldingIndustry
Caps & closure industry | Household Plastic IndustryPrice Search Attributes
Search Application
HDPE Injection High FlowPhysical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Melt Flow Index | 18 | gm/10 min | ASTM D1238 | (190°C & 2.16 kg) | - |
Density | 0.956 | gm/cm³ | ASTM D1505 | (at 23°C) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile strength at Yield | 24.0 | MPa | ASTM D638 | (50mm / min) | - |
Elongation @ Break | 350 | % | ASTM D638 | (50mm / min) | - |
Flexural Modulus | 850 | MPa | ASTM D790 | - | - |
Notched Izod Impact Strength @ 23° C | 35 | J/m | ASTM D256 | - | - |
Rockwell hardness | 65 | Shore D | ASTM D2240 | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
VICAT Softening Point | 122 | °C | ASTM D1525 | (10N) | - |
Heat Deflection temperature | 78 | °C | ASTM D648 | (0.455 Mpa) | - |
Notes
Regulatory Requirements: HDPE grade M5618 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers. Storage & Handling: Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 oC. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance. Health and Safety Information: The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use.
Disclaimer
The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Added to Instamine: 11-May-2022 11:46:34
Last Update: 14-Mar-2024 16:50:33
Plastic Generic Family | Polyethylene (PE) |
---|---|
Plastic Generic Symbol (Sub Group) | HDPE Prime / Virgin Resin |
Availability | India |
Features | Good Processability, Good rigidity, High flow |
Applications | Buckets , Caps & closures , Housewares , Thin wall food containers |
Physical Form | Granules |
Processing Grades | Caps & Closure Grade, Housewares grade, Thin wall injection molding grade |
Processing Technology | Injection Molding |
Industry | Caps & closure industry , Household Plastic Industry |
- Product Review
- Seller Review