MR12C
- ONGC Petro Additions Ltd (OPAL)
- OPALENE PP
- RANDOM COPOLYMER
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpPP Random Co polymer MR12C is a natural colored high clarity grade produced with the latest Ineos Gas Phase polymerization Technology.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ONGC Petro Additions Ltd (OPAL) - Brand
OPALENE PP - Manufacturing Plant
Dahej OPAL
- Plastic Generic Family
Polypropylene (PP) - Plastic Generic Symbol
RANDOM COPOLYMER
Properties
Attributes
Material Status
Commercial: ActiveAvailability
IndiaFeatures
Excellent clarity | Balanced stiffness & impact strength | Good gloss | Easy processability | Anti-Static PropertyApplications
Rigid containers | Housewares | Food packaging containers | Injection Stretch Blow Molded (ISBM) Containers | ISBM bottles | ISBM productsPhysical Form
GranulesProcessing Grades
ISBM Grade | Household containers grade | Food container grade | Container GradeProcessing Technology
Injection Stretch Blow Molding | Injection MoldingIndustry
Food Packaging Industry | Household Plastic IndustryPhysical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Melt Flow Index | 12 | gm/10 min | ASTM D1238 | ( 230°C & 2.16 kg) | - |
Density | 0.90 | gm/cm³ | ASTM D1505 | 23°C | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile strength at Yield | 33 | MPa | ASTM D638 | (50mm / min) | - |
Elongation @ Yield | 12 | % | ASTM D638 | (50mm / min) | - |
Flexural Modulus | 1300 | MPa | ASTM D790A | (1.3 mm/min) | - |
Notched Izod Impact Strength @ 23° C | 50 | J/m | ASTM D256 | ( @ 23°C) | - |
Rockwell hardness | 80 | R Scale | ASTM D 785 | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Heat Deflection temperature | 90 | °C | ASTM D648 | (0.46N/m2) | - |
Notes
Regulatory Requirements: PP Co Polymer grade MR12C shall meet the requirements stipulated in IS 10910 on 'Specification for Polypropylene and its Copolymers for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10909. The Grade and the additives incorporated in it will also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers. Storage & Handling: Prevent PP Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 oC. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance. Health and Safety Information: The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use.
Disclaimer
The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Added to Instamine: 06-Apr-2022 12:48:24
Last Update: 13-Mar-2024 15:32:47
PP Random Co polymer MR12C is a natural colored high clarity grade produced with the latest Ineos Gas Phase polymerization Technology.
Plastic Generic Family | Polypropylene (PP) |
---|---|
Plastic Generic Symbol (Sub Group) | Random copolymer Prime / Virgin Resin |
Description | PP Random Co polymer MR12C is a natural colored high clarity grade produced with the latest Ineos Gas Phase polymerization Technology. |
Material Status | Commercial: Active |
Availability | India |
Features | Anti-Static Property, Balanced stiffness & impact strength, Easy processability, Excellent clarity, Good gloss |
Applications | ISBM bottles, Food packaging containers , Housewares , Injection Stretch Blow Molded (ISBM) Containers, ISBM products , Rigid containers |
Physical Form | Granules |
Processing Grades | ISBM Grade, Container Grade, Food container grade, Household containers grade |
Processing Technology | Injection Molding, Injection Stretch Blow Molding |
Industry | Food Packaging Industry, Household Plastic Industry |
- Product Review
- Seller Review