ULTRA LD 726.07
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpLD726.07 is primarily designed for high speed/low coating weight extrusion coating and is a good coextrusion partner with other polymers. LD726.07 is an
excellent sealing material with a very low seal initiation temperature and high clarity.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Film Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile Strength at Break MD | 7.5 | MPa | ASTM D882 | - | - |
Elongation at Break MD | >800 | % | ASTM D882 | - | - |
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.939 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Index | 14 | gm/10 min | ASTM D1238 | (190°C / 2.16 Kg) | - |
Vinyl Acetate Content | 18.0 | wt % | EXXONMOBIL Method | - | - |
Durometer Hardness | >90 | Shore A | ASTM D2240 | (15 sec) | - |
Durometer Hardness | 34 | Shore D | ASTM D2240 | (15 sec) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Draw Down @35 rpm | 540 | m/min | EXXONMOBIL Method | (Constant output at 35 rpm, 446°F (230°C)) | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Peak Melting Temperature | 83 | °C | EXXONMOBIL Method | - | - |
VICAT Softening Point | 55 | °C | EXXONMOBIL Method | - | - |
Additional Information
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Neck In (328 ft/min(100 m/min) | 11 | cm | EXXONMOBIL Method | (Constant output at 35 rpm, 446°F (230°C)) | - |
Neck In (656 ft/min (200 m/min) | 9.5 | cm | EXXONMOBIL Method | (Constant output at 35 rpm, 446°F (230°C)) | - |
Processing Statement:
1 Constant output at 35 rpm, 446°F (230°C). Coating Value reported is an estimate based on ExxonMobil's correlation from melt flow rate data measured at other
standard conditions. Typical coating values obtained on a pilot coextrusion coating line at ExxonMobil Europe Technical Center, at an air gap of 170 mm (6.22 inches).
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Processing Statement:
1 Constant output at 35 rpm, 446°F (230°C). Coating Value reported is an estimate based on ExxonMobil's correlation from melt flow rate data measured at other
standard conditions. Typical coating values obtained on a pilot coextrusion coating line at ExxonMobil Europe Technical Center, at an air gap of 170 mm (6.22 inches).
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
|
- Product Review
- Seller Review