ULTRA UL 00114
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpUL00114 is a fractional MI copolymer of ethylene and vinyl acetate.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.936 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Index | 0.85 | gm/10 min | ASTM D1238 | (190°C / 21.6 Kg) | - |
Vinyl Acetate Content | 14.0 | wt % | EXXONMOBIL Method | - | - |
Durometer Hardness | 94 | Shore A | ASTM D2240 | (15 sec) | - |
Durometer Hardness | 38 | Shore D | ASTM D2240 | (15 sec) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile Modulus | 68 | MPa | ASTM D638 | (0.20 in/min(5.0mm/min)) | - |
Tensile strength at Break | 16 | MPa | ASTM D638 | (20 in/min(500mm/min)) | - |
Elongation @ Break | 780 | % | ASTM D638 | (20 in/min(500mm/min)) | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Peak Melting Temperature | 91 | °C | EXXONMOBIL Method | - | - |
VICAT Softening Point | 71 | °C | ASTM D1525 | - | - |
Electrical properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Volume Resistivity | 1.1E+15 | Ωm | IEC 62631-3-1 | (500 V) | - |
Relative Permittivity | 2.73 | IEC 62631-2-1 | (50 Hz) | - | |
Dissipation factor | 2.8E-3 | IEC 62631-2-1 | (50 Hz) | - |
Legal Statement:
This product is not intended for use in medical applications and should not be used in any such applications.
This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use. For
detailed Product Stewardship information, please contact Customer Service.
Processing Statement:
Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D 4703 Procedure C (Tensile ASTM D 638 : Type IV
dumbbell).
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Legal Statement: This product is not intended for use in medical applications and should not be used in any such applications. This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use. For detailed Product Stewardship information, please contact Customer Service.
Processing Statement:
Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D 4703 Procedure C (Tensile ASTM D 638 : Type IV dumbbell).
Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability. |
- Product Review
- Seller Review