ULTRA UL 05540EH2
- ExxonMobil Chemical
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpUL 05540EH2 is a copolymer of ethylene and vinyl acetate.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
ExxonMobil Chemical
- Plastic Generic Family
Polyethylene (PE)
Properties
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Density | 0.966 | gm/cm³ | ASTM D1505 | - | - |
Melt Flow Index | 60 | gm/10 min | ASTM D1238 | (190°C / 2.16 Kg) | - |
Vinyl Acetate Content | 39.0 | wt % | EXXONMOBIL Method | - | - |
Durometer Hardness | 44 | ASTM D2240 | (Shore A, 15 sec) | - | |
Durometer Hardness | 8 | Shore D | ASTM D2240 | (15 sec) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile Modulus | 3.3 | MPa | ASTM D638 | (0.20 in/min(5.0mm/min)) | - |
Tensile strength at Break | 5.3 | MPa | ASTM D638 | (20 in/min(500mm/min)) | - |
Elongation @ Break | 1300 | % | ASTM D638 | (20 in/min(500mm/min)) | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Peak Melting Temperature | 48 | °C | EXXONMOBIL Method | - | - |
Legal Statement:
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).
This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement:
Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D4703 Procedure C (Tensile ASTM D638 : Type IV dumbbell, Hardness ASTM
D2240 : 3 plied up disks)
Notes:
Typical properties: these are not to be construed as specifications.
Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Value reported is an estimate based on ExxonMobil's correlation from melt flow rate data measured at other standard conditions, based on ASTM D1238.
Plastic Generic Family | Polyethylene (PE) |
---|---|
Description | Legal Statement: Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB). This product is not intended for use in medical applications and should not be used in any such applications.
Processing Statement: Molded properties were measured on 2 mm (78.7 mil) thick compression molded plaques prepared based on ASTM D4703 Procedure C (Tensile ASTM D638 : Type IV dumbbell, Hardness ASTM D2240 : 3 plied up disks) Notes: Typical properties: these are not to be construed as specifications. Product may not be available in one or more countries in the identified Availability regions. Please contact your Sales Representative for complete Country Availability.
Value reported is an estimate based on ExxonMobil's correlation from melt flow rate data measured at other standard conditions, based on ASTM D1238. |
- Product Review
- Seller Review