FD0274
- Qatar Petrochemical Company (QAPCO) Q.P.J.S.C
- Lotrene
- Low-density Polyethylene (LDPE)
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpLotrene FD0274 is ainly recommended for the extrusion of thin film for light and medium duty applications. It contains both slip additives (target 600 ppm erucamide) and anti blocking additives (target 900 ppm) as well as antioxidants.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
Qatar Petrochemical Company (QAPCO) Q.P.J.S.C - Brand
Lotrene
- Plastic Generic Family
Polyethylene (PE) - Plastic Generic Symbol
Low-density Polyethylene (LDPE)
Properties
Attributes
Material Status
Commercial: ActiveFeatures
Slip additive | Antiblocking additive | Produced very thin film | Clear and glossy filmsApplications
Extrusion of thin film for light and medium duty applications | Thin transparent film | Thin shrink film | Foamed products | Food packaging | Deep freeze |Physical Form
GranulesProcessing Grades
Blown Film grade | Cast film grade | Food Packaging Grade | Shrink film grade | Lamination Film GradeProcessing Technology
Blown film | ExtrusionIndustry
Plastic Film Industry | Food Packaging IndustryCertifications
Comply with US | EU and other food contact legislations | REACH Regulation 1907/2006/ECAdditives
Slip additive | Antiblocking additivesFilm Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile Strength at Yield TD | 11 | MPa | ASTM D882 | - | - |
Puncture Force | 30 | N | Internal Test Method | - | - |
Tear Resistance TD | 35 | N/mm | ASTM D1922 | - | - |
Tear Resistance MD | 65 | N/mm | ASTM D1922 | - | - |
Elongation at Break TD | 600 | % | ASTM D882 | - | - |
Elongation at Break MD | 300 | % | ASTM D882 | - | - |
Tensile Strength at Break TD | 22 | MPa | ASTM D882 | - | - |
Tensile Strength at Break MD | 24 | MPa | ASTM D882 | - | - |
Tensile Strength at Yield MD | 11 | MPa | ASTM D882 | - | - |
Physical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Melt Flow Index | 2.4 | gm/10 min | ASTM D1238 | - | - |
Density | 0.923 | gm/cm³ | ASTM D1505 | (23 °C) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Coefficient of friction | 0.12 | ASTM D1894 | - | - |
Optical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Haze | 8.0 | % | ASTM D1003 | - | - |
Gloss @ 45° | 59 | ASTM D2457 | - | - |
Impact Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Impact Strength | 110 | gm | ASTM D1709 | (F 50) | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
VICAT Softening Point | 89 | °C | ASTM D1525 | - | - |
Crystalline Melting Point | 108 | °C | ASTM E794 | - | - |
Notes
HANDLING & STORAGE Polyethylene products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area and should not be exposed to direct sunlight and/ or heat in any form since this may adversely affect their properties. As a general rule, our products should not be stored for more than three months from receipt date. SAFETY Under normal conditions Lotrène products do not present a toxic hazard through skin contact or inhalation. For detailed information please refer to the Safety Data Sheet. FOOD CONTACT & REACH Lotrène polyethylene products manufactured by Qatar Petrochemical Company (QAPCO) Q.S.C. comply with US, EU and other food contact legislations. Limitations may apply. All QAPCO Lotrène products are complying with REACH Regulation 1907/2006/EC. The aims of this regulation are to improve the protection of human health and the environment through better and earlier identification of the intrinsic properties of chemical substances.
Disclaimer
The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Added to Instamine: 08-May-2021 09:02:38
Last Update: 01-Nov-2023 12:12:26
Plastic Generic Family | Polyethylene (PE) |
---|---|
Plastic Generic Symbol (Sub Group) | LDPE Prime / Virgin Resin |
Description |
|
Material Status | Commercial: Active |
Features | Antiblocking additive, Clear and glossy films, Produced very thin film, Slip additive |
Applications | Deep freeze , Extrusion of thin film for light and medium duty applications , Foamed products , Food packaging , Thin shrink film , Thin transparent film |
Physical Form | Granules |
Processing Grades | Food Packaging Grade, Blown Film grade, Cast film grade, Lamination Film Grade, Shrink film grade |
Processing Technology | Blown film , Extrusion |
Industry | Plastic Film Industry, Food Packaging Industry |
Certifications | Comply with US, EU and other food contact legislations, REACH Regulation 1907/2006/EC |
Additives | Antiblocking additives, Slip additive |
- Product Review
- Seller Review