MG70
- Qatar Petrochemical Company (QAPCO) Q.P.J.S.C
- Lotrene
- Low-density Polyethylene (LDPE)
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpLotrene MG70 is an injection molding grade mainly recommended for the injection of thin and flexible items and the prepartion of masterbatches.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
Qatar Petrochemical Company (QAPCO) Q.P.J.S.C - Brand
Lotrene
- Plastic Generic Family
Polyethylene (PE) - Plastic Generic Symbol
Low-density Polyethylene (LDPE)
Properties
Attributes
Material Status
Commercial: ActiveFeatures
High melt flow index | Excellent Flow & Processability | High flexibility | Glossy surfaceApplications
Injection molding of thin and flexible items | Master batches | Artificial flower | Metal coating | Coating of textilesPhysical Form
GranulesProcessing Grades
Artificial flower grade | Filler masterbatch compound grade | Metal coating grade | Textile coating grade | High flow gradeProcessing Technology
Injection MoldingIndustry
Masterbatch , filler & Compound industry | Paints & Coating IndustryCertifications
Comply with US | EU and other food contact legislations | REACH Regulation 1907/2006/ECPhysical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Melt Flow Index | 7.0 | gm/10 min | ASTM D1238 | - | - |
Density | 0.918 | gm/cm³ | ASTM D1505 | (23 °C) | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile strength at Yield | 8 | MPa | ASTM D638 | - | - |
Tensile strength at Break | 8 | MPa | ASTM D638 | - | - |
Elongation @ Break | 340 | % | ASTM D638 | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
VICAT Softening Point | 80 | °C | ASTM D1525 | - | - |
Crystalline Melting Point | 102 | °C | ASTM E794 | - | - |
Notes
HANDLING & STORAGE Polyethylene products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area and should not be exposed to direct sunlight and/ or heat in any form since this may adversely affect their properties. As a general rule, our products should not be stored for more than three months from receipt date. SAFETY Under normal conditions Lotrène® products do not present a toxic hazard through skin contact or inhalation. For detailed information please refer to the Safety Data Sheet. FOOD CONTACT & REACH Lotrène polyethylene products manufactured by Qatar Petrochemical Company (QAPCO) Q.S.C. comply with US, EU and other food contact legislations. Limitations may apply. All QAPCO Lotrène products are complying with REACH Regulation 1907/2006/EC. The aims of this regulation are to improve the protection of human health and the environment through better and earlier identification of the intrinsic properties of chemical substances.
Disclaimer
The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Added to Instamine: 08-May-2021 09:55:04
Last Update: 09-May-2023 11:31:41
Plastic Generic Family | Polyethylene (PE) |
---|---|
Plastic Generic Symbol (Sub Group) | LDPE Prime / Virgin Resin |
Material Status | Commercial: Active |
Features | Excellent Flow & Processability, Glossy surface, High flexibility , High melt flow index |
Applications | Artificial flower , Coating of textiles , Injection molding of thin and flexible items, Master batches , Metal coating |
Physical Form | Granules |
Processing Grades | Artificial flower grade, Filler masterbatch compound grade, High flow grade, Metal coating grade, Textile coating grade |
Processing Technology | Injection Molding |
Industry | Masterbatch , filler & Compound industry , Paints & Coating Industry |
Certifications | Comply with US, EU and other food contact legislations, REACH Regulation 1907/2006/EC |
- Product Review
- Seller Review