Notes

Typical Processing Conditions: Pipe extrusion Melt temperature: 190 – 220 OC Water bath temperature: 20 – 40 OC Note: Processing parameters mentioned above are for reference only and not to be considered as specifications.They may vary based on the product to be manufactured. Applications: Pipes, Fittings, Sheets & Thermoforming   Note:  Repol AER003N is a natural PP resin for PPR pressure Pipes application. The material is lightly stabilized and meets the designation of PP-R-P-A-N-10-35-003 as per IS 10951.  When compounded with an approved and adequate quantity of antioxidants / thermal stabilizers it meets the designation of PP-R-P-H-N-10-25-003 as per IS 10951 and also meets the performance criteria as per IS 15801.  When compounded with required colorants along-with approved and adequate quantity of antioxidants / thermal stabilizer It meets the designation of PP-R-P-H-C-10-25-003 as per IS 10951 and also meets the performance criteria as per IS 15801.   Regulatory Information: The product complies with Indian Standard IS 10910 on “Specification for polypropylene and its copolymers for safe use in contact with foodstuffs, pharmaceuticals and drinking water. It also conforms to IS 16738:2018 on positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177.1520, Olefin polymers. Storage Recommendations: Bags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight.     

Disclaimer

The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.

Added to Instamine: 06-Mar-2021 05:03:01

Last Update: 02-Nov-2023 13:27:08