H026SG
- Reliance Industries Ltd (RIL)
- Repol
- PP Homopolymer
You`ll need an account to perform this action. Don't worry. It's free!
Sign UpRepol H026SG is a PP homopolymer grade recommended for making raffia tapes used in making fabric for big bags / FIBC, geotextiles, carpet backing and ropes Repol H026SG exhibits good processability with excellent mechanical properties. The grade is formulated with low water carry over additive package.
You`ll need an account to add a review. Don't worry. It's free!
Sign UpYou`ll need to place an order to add a review. Don't worry. It's easy!
Documents
Product Details
- Manufacturer
Reliance Industries Ltd (RIL) - Brand
Repol
- Plastic Generic Family
Polypropylene (PP) - Plastic Generic Symbol
PP Homopolymer
Properties
Attributes
Material Status
Commercial: ActiveAvailability
Asia Pacific | Africa & Middle East | Europe | India | Latin America | North America | South East AsiaFeatures
Good Processability | Excellent mechanical propertiesApplications
Woven fabrics | Monofilament | Rope | | FIBC | Bags | GeotextilesPhysical Form
GranulesProcessing Grades
Raffia grade | Monofilament grade | Jumbo bag grade | FIBC grade | Geotextile gradeProcessing Technology
ExtrusionIndustry
Packaging Industry | Raffia & Woven sacks Industry | Textile , Leather & Foam IndustryCertifications
IS: 10910 | IS 16738:2018 | FDA: CFR Title 21,177.1520Additives
Low water carry over additivePrice Search Attributes
Search Application
PP Homo RaffiaPhysical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Melt Flow Rate | 2.6 | gm/10 min | ASTM D1238 | (230oC/2.16 kg) | - |
Density | 0.90 | gm/cc | ASTM D792 | - | - |
Hardness | 70 | Shore D | ASTM D2240 | - | - |
Mechanical Properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Tensile strength at Yield | 34 | MPa | ASTM D638 | (50 mm/min.) | - |
Elongation @ Yield | 10 | % | ASTM D638 | (50 mm/min.) | - |
Flexural Modulus | 1700 | MPa | ASTM D790A | (1% Secant) | - |
Notched Izod Impact Strength @ 23° C | 40 | J/m | ASTM D256 | - | - |
Thermal properties
Title | Value | Unit | Method | Additional Information | Property Notes |
---|---|---|---|---|---|
Heat Deflection temperature | 104 | °C | ASTM D648 | (455 KPa) | - |
Notes
Typical Processing Conditions: Extrusion temperatures: 220 – 260 °C Water bath temperatures: 30 – 50 °C Stretching temperatures: 130 – 155 °C Note: Processing parameters mentioned above are for reference only and not to be considered as specifications. They may vary based on the product to be manufactured. Applications: Woven fabrics for FIBC, Geotextiles, Ropes & Monofilaments. Regulatory Information: The product complies with Indian Standard IS 10910 on “Specification for polypropylene and its copolymers for safe use in contact with foodstuffs, pharmaceuticals and drinking water. It also conforms to IS 16738:2018 on positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals. The grade and the additives incorporated in it also comply with the FDA: CFR Title 21,177.1520, Olefin polymers. Storage Recommendations: Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
Disclaimer
The information presented here was acquired by Instamine from the producer of the product or material or original information provider or from the distributor or from the producer’s website or from the open-source. However, Instamine assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. This website provides links to other websites owned by third parties. The content of such third-party sites is not within our control, and we cannot and will not take responsibility for the information or content.
Added to Instamine: 10-Mar-2021 09:02:16
Last Update: 06-Jun-2023 17:38:53
Plastic Generic Family | Polypropylene (PP) |
---|---|
Plastic Generic Symbol (Sub Group) | PP Homopolymer Prime/ virgin resin |
Material Status | Commercial: Active |
Availability | Africa & Middle East, Asia Pacific, Europe, India, Latin America, North America, South East Asia |
Features | Excellent mechanical properties, Good Processability |
Applications | Bags , FIBC , Geotextiles , Monofilament , Rope , Woven fabrics |
Physical Form | Granules |
Processing Grades | FIBC grade, Geotextile grade, Jumbo bag grade, Monofilament grade, Raffia grade |
Processing Technology | Extrusion |
Industry | Packaging Industry, Raffia & Woven sacks Industry, Textile , Leather & Foam Industry |
Certifications | FDA: CFR Title 21,177.1520, IS 16738:2018, IS: 10910 |
Additives | Low water carry over additive |
- Product Review
- Seller Review